USB Duplicator - Setup Menu

The Setup menu contains additional settings that allow you to view and modify certain features on the duplicator or media connected to it.

Language	Allows you to change the language of the menu options and prompts on the display.
Auto Start	Auto Start allows you to define the amount of time the duplicator will wait for additional USB devices to be connected to the device after a duplicator function such as Copy, Compare, Erase, or Format is selected.
Read Error Skip	Read Error Skip allows you to configure the number of times the system will skip over sectors when it encounters a read error when reading from the USB in the Source port.
Write Error Skip	Write Error Skip allows you to configure the number of times the system will skip over sectors when it encounters a write error when copying to Target devices.
Size Tolerance	The duplicator will allow the Target flash devices to be less than the capacity of the Source drive by the percentage specified.
Port Detection Warning	This will allow the system to show a warning message if the total # of ports available are less than the preset.
Buzzer	This allows you to turn on and off the audible indicator sound the duplicator makes.
Startup Menu	This allows you to designate which menu option on the Main Menu is displayed when the device is powered on.
Erase Prior Copy	The duplicator will run an Erase (Quick, Raw, or Secure) on Target devices before copying
Async Mode	This converts modes Compare and Copy and Compare into asynchronous variations of those modes.
Dual Source Mode	This allows you to designate port #2 (first target port) as a read only port used for the Compare process.
Min. Copy Speed	Min. Copy Speed is designed to verify the blank target USB drives are able to reach a minimum write speed.