Error Codes | Error Message | Description | Recommended Solution |
201 | Bad Master | The Copy process failed due to a read error which occurred on the Source device. | Check the Source device by running the “Verify Source” function. If the device does not pass the “Verify Source” check, try duplicating using a different Source device. |
202 | No Device Found | The duplicator does not detect any Target devices connected. | Remove and then reconnect the Target devices. Make sure that the Green LED indicator is lit next to each Target device before starting the duplication process. |
203 | Source Removed | The Asynchronous Copy process failed because the Source device is not detected. | Remove and then reconnect the Source device. Make sure that the Green LED indicator is lit next to the Source device before starting the duplication process. |
206 | Targets & Master Size Mismatch! | The Target devices are smaller in capacity than the Source device. | Target devices have to be equal or greater in capacity than the Source. If the capacity on the Source and Targets are listed as being identical, please enable the “Size Tolerance” option in the Setup menu. |
260 | No Update File | During the Update Firmware process, the duplicator was not able to locate a firmware update file. | Confirm that the USB device containing the firmware update file is formatted FAT32. Also confirm that the firmware update file is not a “.zip” or “.rar” file. If it is, please extract it and transfer the extracted files to the USB device. |
261 | Wrong Update File | The firmware update file is not compatible with your duplicator system, or the firmware update file is corrupted. | Contact Kanguru Solutions’ Technical Support to obtain the correct firmware update file. |
262 | Unknown Flash Model | The firmware update file is not compatible with your duplicator. | Contact Kanguru Solutions’ Technical Support to obtain the correct firmware update file. |
Comments
0 comments
Please sign in to leave a comment.