USB Duplicator - Setup Menu - Buzzer

The Kanguru USB Duplicators are provided with an audible beep sound whenever there is a button press or if a task has been completed.  This feature is able to be enabled or disabled using the Buzzer setting within the duplicator.

The options for the buzzer are as follows:

On	The device will produce an audible sound whenever a button press occurs or if a task completes (successfully or fails).  Note: This is the default setting.
Off	The device will not produce any audible sound whenever a button press occurs or if a task completes (successfully or fails).

To change the Buzzer setting:

1. Power on the duplicator.

2. From the Main Menu press the Up or Down buttons until you see Setup.

3. When Setup is displaying for you, press the ENT button to enter this menu.

4. You will be able to access the Setup menu and from here you can use the Up or Down buttons to switch menu options.

5. After locating Buzzer, press the ENT button to enter this option.

6. You can use the Up or Down buttons to switch Buzzer options.

7. After locating the option, you would like to use, press the ENT button and you will be brought back to the Setup menu.

8. To proceed back to the Main Menu, press the ESC button. This will prompt you with a message informing you that settings are being saved. Once this process is completed, you will be back to the Main Menu.