KanguruClone NVME SSD Duplicator

The current firmware version for the Kanguru 4 NVME SSD Duplicator is 2.32.5

The current firmware version for the Kanguru 11 NVME SSD Duplicator is 1.3.1

NVMe 4 Target	View Release Notes	8e03b5711512ae93cd9acf112be7da717c947e6cba86784444e8551bfd17606c
NVMe 11 Target	View Release Notes	2e9c78a5ef22b7e1f108c7bbfa2efefe3b485bedbfc3c304face6dd1aff91045

For quick and easy steps to check the values below please refer to our SHA256 Checksum Utilities page.

Kanguru Application SHA256 Checksum Values

Important! The checksum values listed below are for .zip download and not for the .exe or .app files contained inside.  If you unzip the contents and run the SHA256 checksum on the file contained within, the checksum values will be different then are shown here.

1. If you do not know the current firmware version currently on your duplicator, follow these steps:
2. Select the settings icon located on the bottom right of the display (looks like a wrench).
3. Once you are in Settings Menu, select the About option at the bottom right of the display.
4. This feature with provide you with the current firmware version on your duplicator.

To perform this update, you will need the following:

• 1 blank USB drive that can be formatted to file system Fat32
• Kanguru M.2 NVMe SSD Duplicator
• Firmware - This can be downloaded by selecting the corresponding firmware below.

 
To update your duplicator, follow these steps:

1. Format a USB drive to FAT32 (tools to assist with this formatting process can be downloaded by clicking Download Formatting Tools).
2. Once the drive is formatted, unzip the firmware file you downloaded and copy the files over to the root directory of the newly formatted USB drive.
3. Connect the USB drive to the USB port on the duplicator and boot the device.
4. Select the settings icon located on the bottom right of the display (looks like a wrench).
5. Tap the Advanced tab at the top of the display and select Update.
6. The update process will begin and can take several minutes to complete and once the update process is completed, reboot the duplicator using the reboot option at the top right of the screen.
7. When the duplicator fully boots, repeat steps 3-6 once more as the update process must be run twice.
8. After the second update process is completed, the firmware update process is complete.