USB Duplicator - Utilities Menu

The Utilities menu contains additional settings that allow you to view and modify certain features on the duplicator or media connected to it.

Device Info	Will display general information regarding the USB devices connected to the duplicator.
System Info	Displays information regarding the duplicator’s hardware and firmware version.
Measure Speed	Displays the reported capacity and Read/Write speeds of the USB drives connected to the duplicator.
Verify Source	Scans the USB drive connected to the Source port to verify that it is readable.
Rebuild Source	This will write to all unwritten sectors on the drive connected to the Source port.
Calculate Checksum	Will display CRC64 checksum value for the drive connected to the Source port on the duplicator.
Load Default	Will reset all of the settings back to their original manufacturer’s default configuration
Update Firmware	Allows the user to update the firmware on the duplicator to correct certain bugs or add additional features.
Save	This will save all settings that have been modified on the duplicator.
Output Log to File	A log will be downloaded from the duplicator to a USB drive on the device.