The Load Partition function will guide you through loading an image of a Master disc into one of the hard drive partitions.
1. From the Hard Drive Setup menu, press the UP or DOWN button to navigate to Load Partition. Press the ENT button to enter the Load Partition menu.
|
|
The remaining capacity available on the hard drive is displayed in the upper right corner.
|
2. From the Load Partition menu press the UP or DOWN button to select how you want to load the image.
You have three options for loading a image to the hard drive:
√ Auto Generate - Load the image on a new partition with a name automatically generated
by the system. Automatically generated partitions are assigned a name
in the form of New-XXXX where XXXX represents a four-digit number.
The first partition created is 0001, the second is 0002, etc...
√ New Partition - Load the image on a new partition with a user created name. You will
have to enter the partition name manually.
√ Overwrite - Load the image over an already existing partition. This option is only available
if you have previously loaded an image to the hard drive.
3. Press the ENT button to confirm. The Reader drive tray will automatically open.
4. Insert a Master disc into the Reader drive. Close the tray and wait 5 - 10 seconds for the system to recognize the disc.
|
Note: If the preparation screen is displayed for more than 2 minutes after you have inserted your disc, please check the quality of the disc.
5. After 2 or 3 seconds of processing time, the Load Progress screen will appear.
|
|
6. Once the Load process has been completed, you will see the Load Partition OK screen. The Master Disc will automatically be ejected. Press the ENT button to exit to the Hard Drive Setup menu.
|
Comments
0 comments
Please sign in to leave a comment.