Mix Audio Tracks Using Hard Drive

By mixing an audio CD through the hard drive, all the tracks you select from the audio CD will be transferred to the hard drive. Once you’ve completed your track selection, you will be instructed to copy them onto blank CD-R media.

Mixing through the hard drive is considered a safer method for creating mixed audio tracks compared to mixing directly to CD. If any of the audio CD tracks you wish to mix are not readable due to scratches or bad quality, the blank CD-R media will NOT be ruined since the blank CD-R media isn’t being recorded on until all audio CD tracks are successfully transferred to the hard drive.

	1. From the Main Menu, press the UP or DOWN button to navigate to Mix Audio Tracks. Press the ENT button to enter the Mix Audio Tracks menu.
	2. You will see the Mix Audio Tracks Options menu. Press the UP or DOWN button to select Through Hard Drive. Press the ENT button to confirm your selection.
	Once the Mix Mode selection is submitted, you will see the Preparation screens. The master disc drive tray will automatically be ejected.

3. Insert an audio CD into the Reader drive.

After you’ve placed an audio CD containing the track(s) you wish to copy, please allow 5-10 seconds for the system to detect it. If the Preparation screen is displayed for more than 2 minutes after you have placed your audio CD into the drive, please check the disc quality.

After it has been recognized you will see the Track Selection screen:

√ 0 Trk - number of tracks selected so far. √ 0m:0s - total minutes and seconds of playtime. √ Track 1 : - currently on track 1 of the Audio CD. √ 4m:31s - current track’s running time.

4. Press the UP or DOWN button to navigate through each track on the audio CD. Press the ENT button to select the track you want to include on your mix.

	Once a track is selected, you will see an asterisk symbol (*) appear to the left of the track number. Press the ENT button again to deselect the track.
	Note: If the track you have selected will cause the total playtime to exceed your blank CD-R media capacity, you will see an Over Blank Disc Capacity screen. Press the ENT button to return to the track selection menu. The last track selected will be de-selected automatically.

The Mix process will begin and you will see the following screen:

√ 1- the system is currently transferring track 1. √ 10% - the current track is 10% complete. √ 04:31 - current track’s running time.

5. Once you have finished selecting the tracks for this Audio CD, press the UP or DOWN button until you see the Are you done? screen. Press the ENT button to confirm your selection.

6. Once the mixing process is completed, you can choose to either continue adding tracks from another audio CD or finalize the CD:

	A - If you want to add tracks from a different audio CD, press the UP or DOWN button to select Insert Next Master. Press the ENT button and the audio CD will automatically be ejected. Insert the next audio CD and repeat steps 4 - 6 to continue adding tracks.
	B - If you are finished adding tracks to the list, press the UP or DOWN button to select Finish Mixing. Press the ENT button and you will see the Confirm to Finalize screen. Press the ENT button to confirm that you are ready to finalize the CD.

7. The audio CD will be automatically ejected. Insert blank discs into the writer drives and press the ENT button.

The Copy process will begin and you will see the Copy Progress screen.

√ H - indicates that the source location is the hard drive √ 529M - total size of all tracks. √ 0/6 - currently transferring first of six tracks. √ 40% - the current track is 40% complete. √ 79M - size of current track being copied.

8. Once the Finalizing process is completed, you will see the following screen. You can then press the ENT button and you will exit to the Main Menu. Your Mix Audio CD will be ejected.