Optical Duplicator Writing Method

The Writing Mode setting allows you to select the writing method. The default setting is Disc at once.

There are two Writing Mode settings:

√ Disc at Once - all tracks are recorded without the laser ever stopping, and the disc is

closed. It is strongly advised to leave this setting as Disc at Once.

√ Track at Once - Each time a track is finished, the recording laser is stopped, and two

run-out blocks are written. When the laser starts writing another track,

one link block and four run-in blocks are written.

	1. From the Setup Menu, press the UP or DOWN button to navigate to Writing Mode. Press the ENT button to enter the Writing Mode menu.
	2. Press the UP or DOWN button to select the Writing Mode. Press the ENT button to confirm your selection. You will exit to the Setup Menu.