Optical Duplicator External Connection

The External Connection setting allows you to turn the USB port (or Ethernet port on Network models) on the back of the Kanguru Duplicator On or Off. When turned On, the system can be connected to a computer. If your Duplicator came with a hard drive, you will be able to access the Duplicator’s hard drive from your computer. If your Duplicator did not come with a hard drive, you will be able to access one of the Writer drives using the computer. The default setting is Off.

Warning: If your Duplicator came with a hard drive, do not try to access the hard drive through your computer before installing Kanguru Media Manager. The Duplicator’s hard drive comes formatted in a special file system that will not be recognized until Kanguru Media Manager is installed.

1. Connect the Kanguru Duplicator to your PC using the USB cable provided.

	2. From the Main Menu, press the UP or DOWN button to navigate to USB Connection. Press the ENT button to enter the USB Connection menu.
	3. Press the UP or DOWN button to select On or Off. Press the ENT button to confirm your selection.
	4. If you changed the USB Connection setting, after 3 - 5 seconds you will see the Restart screen. You must restart your Duplicator at this time.

Note: The Duplicator must be restarted after this setting is changed in order to take effect.

5. When the system boots back up, your computer should recognize a DVD drive or Hard drive, depending on the model you purchased.

Note: While USB Connection is turned On, the drive that is being enabled for USB functionality will be disabled on the Duplicator.

1 to 1 Duplicator users: When you turn USB Connection on, your Duplicator will display a “No Writers Enabled” error message when you reboot your system. Turn USB Connection off in order to get rid of this message.