Optical Duplicator Auto Copy

This Auto Copy function allows the system to operate the disc-to-disc copy function without any user inputs for ease of operation.

Note: While in the Main Menu, you can press the COPY shortcut button on the LCD panel to directly enter the Copy menu.

1. From the Main Menu, press the UP or DOWN button to  navigate to Auto Copy. Press the ENT button to begin the Auto Copy process.

Any trays that do not contain discs in them will automatically be ejected. You will see the following Preparation screens:

2. Insert discs into the drives.

After you’ve loaded the drives with discs, close the trays and allow 5 - 10 seconds for the system to detect them. If either of the preparation screens are displayed for more than 2 minutes after you have inserted your discs, please check the quality of the discs.

Once the system detects that all the Writer drives are filled with blank media the duplication process will begin automatically. After 2 or 3 seconds of processing time, the Copy Progress screen will appear.

3. Once the Copy process has been completed, you will see the following screen.

√ PASS 7 - number of discs successfully copied. √ FAIL 0 - number of discs that failed to copy. √ ( 7 ) - number of copies made for this job so far.

The successful copies will be ejected. Remove the successful copies, refill the trays with blank media. Once the system detects that all the trays are full with blank media, it will automatically continue making another round of copies. Any discs that fail to copy (bad copy) will not be ejected automatically. You will need to manually eject them and throw them away if they are single recording discs. Empty drives will also not be ejected automatically.

4. If you have finished making copies, press the ESC button to terminate the current duplication project and exit to the Main Menu.