The Kanguru Duplicators are provided with an audible beep sound whenever there is a button press or if a task has been completed. This feature is able to be enabled or disabled using the BTN. Sound setting within the duplicator.
The options for the BTN. Sound are as follows:
| Disable | The device will not produce any audible sound whenever a button press occurs or if a task completes (successfully or fails). |
| Enable | The device will produce an audible sound whenever a button press occurs or if a task completes (successfully or fails). Note: This is the default setting. |
To change the BTN. Sound setting:
- Power on the duplicator.
- From the Main Copy Menu press the Up or Down buttons until you see Setup.
- When Setup is displaying for you, press the ENT button to enter this menu.
- You will be able to access the Setup menu and from here you can use the Up or Down buttons to switch menu options.
- After locating BTN. Sound, press the ENT button to alter this option.
- Press the ESC button after selecting the desired setting to proceed back to the Main Menu.
For more information on the Kanguru Hard Drive Tower Duplicator, please refer to the User Manual located at HERE.
Comments
0 comments
Please sign in to leave a comment.