Hard Drive Tower Duplicator - Setup Menu - No Cap Check

The Kanguru Duplicator has a built-in capacity check function which will check the capacity of the Source hard drive and the Target hard drive(s) during Disk or Brief copy processes and determine whether the drives’ capacities are the same or if the Target hard drive(s) contains more overall capacity then the Source hard drive.

The options for the No Cap Check are as follows:

Disabled	Prior to a Brief or Disk Copy process is performed the system will check the capacity between the Source and Target hard drive(s) to determine whether the capacity is the same. If the capacity is different the process will be canceled. Note: This is the Default setting.
Enabled	When a Disk or Brief copy process is executed, the system will not check the capacity between the Source and Target hard drive(s) and start the copy process regardless whether they have different capacities.

To change the No Cap Check setting:

1. Power on the duplicator.
2. From the Main Copy Menu press the Up or Down buttons until you see Setup.
3. When Setup is displaying for you, press the ENT button to enter this menu.
4. You will be able to access the Setup menu and from here you can use the Up or Down buttons to switch menu options.
5. After locating No Cap Check, press the ENT button to alter this option.
6. Press the ESC button after selecting the desired setting to proceed back to the Main Menu

For more information on the Kanguru Hard Drive Tower Duplicator, please refer to the User Manual located at HERE.