Hard Drive Tower Duplicator - Defining Copy and/or Compare

Before performing a duplication, take a moment to define the SET COPY and SET COMPARE options under the Setup Menu. These options will tell the duplicator how the Disk and Brief modes will operate.

Set Copy Functionality

When SET COPY is enabled Brief, Resize, and Disk modes will execute a Copy process. The SET COPY option is enabled by default.

To change the SET COPY option:

1. Power on the duplicator.
2. From the Main Copy Menu press the Up or Down buttons until you see Setup.
3. When Setup is displaying for you, press the ENT button to enter this menu.
4. You will be able to access the Setup menu and from here you can use the Up or Down buttons to switch menu options.
5. After locating SET COPY, press the ENT button to alter this option.
6. Press the ESC button after selecting the desired setting to proceed back to the Main Menu

Set Compare Functionality

When SET COMPARE is enabled Brief and Disk modes will execute a Compare process, comparing the data between the Source and Target drives and confirming that they are identical. The SET COMPARE option is disabled by default.

To change the SET COMPARE option:

1. Power on the duplicator.
2. From the Main Copy Menu press the Up or Down buttons until you see Setup.
3. When Setup is displaying for you, press the ENT button to enter this menu.
4. You will be able to access the Setup menu and from here you can use the Up or Down buttons to switch menu options.
5. After locating SET COMPARE, press the ENT button to alter this option.
6. Press the ESC button after selecting the desired setting to proceed back to the Main Menu

Set Copy & Compare Functionality

Both the SET COPY and SET COMPARE options can be enabled at the same time. When both options are enabled Brief and Full modes will execute a Copy & Compare process, copying the data from the Source to the Target drives and then comparing the data on all drives to ensure that they are identical.

For more information on the Kanguru Hard Drive Tower Duplicator, please refer to the User Manual located at HERE.