Mobile Clone - Main Menu - Load

Load allows you to store an image of a hard drive to a Storage Center. A Storage Center is a hard drive that has been formatted to store hard drive images. The Storage Center allows you to quickly and conveniently access common duplication projects.

To load an image of a hard drive to a Storage Center:

1. From the Main Menu tap the SET button to navigate to Load.

2. Connect your Storage Center hard drive to the side of duplicator labeled SOURCE.

3. Connect the Source hard drive to the side of duplicator labeled TARGET.

4. Tap the RUN button to begin the load process.

Note: If the screen displays the message SOURCE NOT FORMATTED it means that the hard drive connected to the Source side has not been formatted as a Storage Center. Tap the RUN button to format the hard drive connected to the Source side as a Storage Center or tap the SET button to cancel.

5. The duplicator will ask you to input a file name for the image. Enter a file name:

• The file name consists of three digits. The digit furthest to the right will be blinking, indicating that it is currently selected. Tap the RUN button to increase the value by one.
• Tap the SET button to select the next digit to the left. Tap the RUN button to increase the digit by one. Repeat this step as necessary.

6. When you have completed naming the image file, hold the RUN button and the load process will begin.

Note: If the image file name you entered is already being used by another image file, the system will ask you to confirm overwriting the previously saved file. Tap the RUN button to confirm or tap the SET button to cancel.