Verify will check that all sectors are readable on the drive connected to the side of the duplicator labeled TARGET. If a hard drive fails duplication, you should run the Verify feature to ensure that the drive is healthy.
To verify your hard drives for duplication:
1. From the Main Menu, tap the SET button to navigate to Verify.
2. Connect your hard drive to the side labeled TARGET. Tap the RUN button to begin the Verify process. The following screen will be displayed during verification:
3. Once the verification process has completed, the following screen will be displayed:
Tap the SET button to view the total Verify time.
Comments
0 comments
Please sign in to leave a comment.